Food-Industry

How to review a liner and carton change for IQF vegetables

A change in the liner or carton used for individually quick frozen (IQF) vegetables can alter how the finished case closes, stacks and carries its lot code. A shorter case can leave less room to fold the liner, even when the ordered fill weight stays the same. For a packaging trial, use the vegetable cut, net weight and pallet pattern ordered by the buyer.

Identify the two packaging components

Record the old and new part numbers for the liner and carton. For the liner, ask for the finished bag dimensions, material construction, nominal thickness and closure method. Confirm which surface touches the food. For the carton, record its internal dimensions and board specification, along with the tape or other closure specified for the packing line. Check the liner supplier’s supporting documents against the proposed material code and intended frozen use. If the new material has a different revision or construction, ask the supplier to explain which documents cover it.

Check a filled case under the intended handling conditions

Fill the trial liner with the actual product, including the largest pieces expected in the cut specification. On a broccoli line, look at how stems and florets sit near the bag corners. Inspect the closure for trapped pieces and folds. Confirm that the closed bag sits below the carton flaps and that the flaps meet without pressure from the product. Retain a case packed with the previous materials for comparison.

Bring the trial cases to the storage condition used for the product, then check them after normal handling and stacking. Examine the liner for tears or pinholes where it rests against carton edges. Check the bottom closure, corners and lot label on each sampled case. When a case is wet or damaged, record where in the handling sequence it was found and inspect the condition of the inner bag separately. This helps the team trace the damage back to packing, storage or movement.

Carry the approved change into the shipment record

Attach the accepted packaging codes, packing instructions and a sample case label to the trial record. Set a clear changeover point by production lot. At the first run with the approved materials, check that the liner and carton codes match the trial and that the product lot remains visible on the completed case. Record who approved the change and how any old packaging stock will be used or removed from the line.

For more detail on matching the bag specification and supporting reports to the intended use, see GreenLand-food’s guide to reviewing food-contact packaging for frozen food.

Rate this page!
This article has been submitted by

GreenLand-food

.

URL

Like it? Share this page and spread the love:

pi-Team

We are a group of authors and freelance journalists specialized on the topics of the packaging industry sector. Most of us origin from the packaging, food or beverage industry. We consider ourselves experts in this field. Whatsoever, we are for sure enthusiastic about packaging.