How to Specify an Insulated Pouch for Chilled Meal Kits
Tray dimensions, cold-pack position and the number of times a meal kit is opened all affect how its insulated pouch should be built. Start with the kit as it leaves the packing bench. A protein tray, sealed vegetable portion, sauce sachet and capped bottle already have packaging of their own. The outer pouch provides an insulated enclosure around that assembled load.
Fit the pouch around the assembled kit
A flat pouch sealed on three sides has no bottom or side gussets. The fourth side is the loading opening, and the filled shape comes from the items inside. This construction suits a compact load of prepacked items when the pouch does not need to stand open on its own. Trial the actual trays and coolant together to check how easily a packer can load and close it.
Watch both extremes during the fit trial. In an undersized pouch, a tray may enter at an angle and ride across the sealing band, putting strain on the seam. In an oversized pouch, the load may settle low and leave a pocket of air above it. Still air in an insulating layer and air free to circulate around the payload behave differently. Aim for a close fit that still leaves the mouth clear for sealing.
Figure credit: Ecopack. Three tray fits in a flat insulated pouch: a tray across the seal band, a close fit and excess space above the load.
Position coolant next to the load
Place the cold pack against the packaged goods and clear of the opening. In a shallow kit, it can sit in a single layer on top of the trays. In a deeper box, it can sit between two trays. Keeping it next to the load limits the space air can circulate through between the coolant and the goods.
Choose a closure based on handling
A permanent heat seal suits a kit opened once at delivery. A zipper suits an order that must be opened again before delivery, such as when a driver removes a tray or a store adds an item. Allow room for the zipper at the mouth and check that operators can close it fully under normal working conditions.
Leave room for the carry handle and artwork
In the handled construction shown in Ecopack’s guide, the moulded grip is welded through the top seal. Keep the handle weld band clear when laying out print. For a supplier quote, provide the tray dimensions, number of items per pouch, intended cold-pack position and expected number of openings. Those details let the supplier propose a pouch that fits the actual kit.
Further reading: Ecopack’s guide to insulated pouches for meal kits.
Ecopack
.



